CO2 / Cryogenic Vaporizer
| This unit was built to vaporize CO2 and cryogenic liquids. We have used it to vaporize liquid CO2 as well as liquid nitrogen, butane and ethylene. The heater is propane fired and it has a hot water shell and tube heat exchanger. It has been logged at 70# per minute of CO2 continuous flow and more for short periods of time. | |
|
|
Vaporizer uses: vaporizing liquid nitrogen, CO2 liquid or liquid argon for the purpose of inerting tanks. Tanks can be inerted with these gases to remove or reduce oxygen. Inert gas is very dry and therefore moisture is removed when the tank gases are replaced. It is possible to make repairs to tanks that contain flammable gases by inerting the tanks so as to reduce the oxygen level to a point that the mixture will not burn (or explode).
The reason to use an inert gas vaporizer is that it is a very good way to provide a large quantity of high quality inert gas. A tank truck of liquid nitrogen may hold 500,000 cu/ft and a carbon dioxide tanker may hold 350,000 cu/ft. Those are quantities that allow big jobs to take place. |
| Note 1: Extreme caution must be exercised when the inerting process is used to remove oxygen for the purpose of hot work. This work only produces dependable results when it is done correctly.The tanks must be checked for flammable condition by a very competent person before any hot work is done. Never weld or cut on a tank without checking for explosive gases with appropriate test equipment operated by experienced personnel. Inerting tanks and checking them for flammable contents is a specialized business, and it should be done by personnel that are experienced. Inerted tanks will most likely loose the inert gas over a period of time and must be checked periodically to confirm their condition. Note 2: Extreme caution must be exercised to keep personnel out of tanks that have been inerted. The inerting process is designed to remove oxygen from the tanks and therefore the inerted tanks will not support life. At the minimum the tanks must be posted to warn personnel of the inert gas. Inert gas may be odorless. Never enter a confined space without testing the space for oxygen and flammable gases.
Note 3: Notes 1 & 2 are subject to many variables, please read them again, we cannot over emphasize the need for extreme caution and experienced personnel when using inert gases for these purposes. Although it does not sound like much fun, the vaporizer could be used to euthanize bird flocks. We mention that because if it must be done, it should be done correctly. Call us for more information. 713-201-7517 |

